jeep wrangler 1/8 V2 RTR 2.4G 4WD Electric Simulation RC Car Crawler Rock Buggy Off Road Vehicle Model Remote Control

YK 4082 1/8 V2 2.4G 4WD Electric Simulation RC Car Crawler Rock Buggy Off Road Vehicle Model Remote Control Toys Gift

Features:

.The front face adopts an angry face design, and the front face can be removed with only a few screws. The 7 air intake holes have been opened, and the interior is equipped with a black mesh, which is closer to the real car structure.
.The dashboard, seat, and headrest of the driver's cabin have been installed. The rear of the car is equipped with a more popular spare tire rack assembly, which can be directly replaced.
.Machined steel gears are all used inside the gearbox, which is stronger and very smooth. The whole car uses a ten-byte structure. The beam is made of aluminum alloy CNC integrally formed. The shock absorber adopts a large-capacity cylinder with outer spring, which can increase or decrease the height of the vehicle through the adjusting ring.
.In terms of electrical equipment, the ESC is Hobbywing 880. In order to balance climbing and crossing, the original factory set the drag brake value to 50%
.The motor uses 775 black leather, which is full of power and has good low-torque performance.
.The servo is upgraded to 25KG all-metal gear, and the servo arm is also aluminum alloy style.
.Standard headlights, roof lights, turn signals on both sides of the daytime running lights on the wheel eyebrows, rear brake lights, turn signals, and reversing lights.
.The car shell and the car body are connected by flipping and magnetic attraction. The use of a larger magnet can more firmly attract the car shell. In addition, a knob is added to prevent the car shell from bounce off by impact.
.The original car comes with a set of front/rear anti-roll bar components, which can be installed according to different terrains. When walking on climbing or rough terrain, disconnect and remove the anti-roll bar. If you are on the beach, you may wish to install it. Please note that the rear axle thrust bar needs to be removed.
.The axles are thickened, and the nylon formula is adjusted. In order to better cope with the cold climate environment, the door hinges are replaced with decorations of the same color as the body.
.This car adopts door bridge design, front/rear differential lock (remote control), high/low speed shift function (remote control), complete functions, strong playability of operation, whether it is off-road or climbing mode, it will bring you a new driving experience.
.The car has a variety of shell colors for you to choose, you only need to prepare the battery and charger to start playing. We provide professional pre-sales consultation and after-sales service. If you have any questions, please contact us in time.
.For Ages: 14+

Specifications:

.Color: Grey
.Material: Metal + Plastic
..Full Length 635mm (including spare tire)
.Wheelbase: 370mm
.Approach Angle: 65°
.Longitudinal Passing Angle: 30°
.Departure Angle: 48°
.Ground Clearance: 95mm (when adjusting ring is 5mm)
.Tire size: 135/50mm
.Gear Ratio: (18T) 1:13.4 (high speed) / 1:33 (low speed)
.Weight: 4.19KG (excluding battery and counterweight)
.Motor: 775 large torque waterproof motor
.ESC: HobbyWing 880 waterproof ESC
.Servo: 25KG full metal gear steering gear*1pcs+17KG small steering gear*3pcs (front/rear differential lock steering gear, high and low speed gear shifting gear)
.Remote Control: 2.4GHz/6 channel full-scale intelligent transmitter (light control integration)
.Car Battery (Not Included): 2S-3S high-capacity lithium battery is recommended
.Charger (Not Included): It is recommended to balance the charger for lithium batteries.
.Product Dimensions: 63 x 29 x 30cm
.Product Weight: 4190g
.Package Dimensions: 70 x 35 x 35cm
.Package Weight: 6500g
.Packing: Graphic Carton

Package Content:
The V2 version does not come with a spare tire, buyers who buy it need to pay attention
.1 x RC Car
.1 x Remote Controller
.1Set x Sticker
.1 x User Manual